Difference between revisions of "BcMeter Parts"

From bcmeter.org
Jump to navigation Jump to search
(Wiki update: sync with manual and dev docs (2026-03))
Tag: New redirect
 
(8 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
#REDIRECT [[Bill of material]]
== Overview of parts and approx. costs ==
[[File:Overview.jpg|500px|left]]<br clear=all>
A: Upper Case (3D Printed)<br>
 
B: Lower Case(3D Printed)<br>
 
C: Intake manifold(3D Printed)<br>
 
D: LED/Sensor holder(3D Printed)<br>
 
E: LED/Sensor holder(3D Printed)
<br>''Print on any 3d printer or send to any service provider. Use black filament / resin. If possible, use flex filament or mix resin with flex resin. 200g Resin / FDM ~ $5-$10<br> - 3D printing service is more expansive (~$100)''<br>
 
F: bcMeter 12V or 5V - (find gerber files for PCB fabrication on [https://bcmeter.org bcmeter.org]) ~$25 <br>
 
[[File:Bcmeter-tht.jpg|300px|alt=bcMeter general purpose PCB for 12V and large pumps|bcMeter general purpose PCB for 12V and large pumps]]
bcMeter general purpose PCB for 12V and large pumps
 
[[File:Bcmeter-smd.jpg|300px|alt=bcMeter SMD PCB for 5V and smaller pumps|bcMeter SMD PCB for 5V and smaller pumps]]
bcMeter SMD PCB for 5V and smaller pumps
 
G: Components from mouser.com or anywhere else  (~60) – [https://www.mouser.de/ProjectManager/ProjectDetail.aspx?AccessID=0f6a28fa20 mouser shopping cart] or [[bill of material]]
 
H: Filter papers – Type TBD, tested with Pall T60A20 – ask local labs for availability<br> This is crucial, tell us what type you use, send us a sample and we find the correction factor to use. [[Filter_paper_correction_factor|Refer to Correction factors for different filter papers]]
 
I: Additional material:<br>
 
* 22-30 AWG Wire to connect the sensor and LED to PCB
* Hot Glue - use to seal air leaks around sensor brackets ~$7
* Rubber band (SHORE A) for sealing intake  ~$11
* Silicone hose 5mm inner diameter ~$5
* M3 Screws ~$3
* M3 threads ~$7
(Screws and threads not required for basic operation)
* microSD Card (4gb+)~$8 <br>
* 40 Pin Header (optional for plug the Hat)<br>
J: Order membrane pump (~$160) - here (TBD – cheaper solution may be available soon)<br>
 
== 3D Printable files ==
 
STL for 3D Printing (SLA or FDM) [https://github.com/bcmeter/bcmeter github repository] or [https://bcmeter.org bcmeter.org])<br>
 
[[File:Bcmeter-general-purpose-case.jpg|500px|left]]<br clear=all>

Latest revision as of 15:10, 8 March 2026

Redirect to:

Retrieved from "https://bcmeter.org/wiki/index.php?title=BcMeter_Parts&oldid=299"