|
|
| (20 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| | | #REDIRECT [[Bill of material]] |
| '''
| |
| | |
| [[File:Overview.jpg|500px|left]]<br clear=all> | |
| | |
| '''What is shown here?'''
| |
| | |
| <br>
| |
| A: Upper Case<br>
| |
| | |
| B: Lower Case<br>
| |
| | |
| C: Intake manifold<br>
| |
| | |
| D: LED/Sensor holder<br>
| |
| | |
| E: LED/Sensor holder<br>
| |
| | |
| F: bcMeter Pi Hat Circuit board (Order from pcbway.com, jlcpcb.com or anywhere else (you will get 5 PCBs (minumum) for ~$20 with fast shipping) – find gerber files on [https://github.com/bcmeter/bcmeter github repository] or [https://bcmeter.org bcmeter.org])<br>
| |
| | |
| G: Components from mouser.com or anywhere else (~60) – [https://www.mouser.de/ProjectManager/ProjectDetail.aspx?AccessID=0f6a28fa20 mouser shopping cart] or [[bill of material]]
| |
| | |
| H: Order filter papers (~$50) – Pack of 50 sufficient for at least 1000 samples. Type TBD, tested with T60A20 – ask local labs for availability<br>
| |
| | |
| I: Additional material:<br>
| |
| | |
| * Hot Glue - use to seal air leaks around sensor brackets ~$7
| |
| * Rubber band (SHORE A) for sealing intake ~$11
| |
| * M3 Screws ~$3
| |
| * M3 threads ~$7
| |
| (Screws and threads not required for basic operation)
| |
| * microSD Card (4gb+)<br>
| |
| * 40 Pin Header (optional for plug the Hat)<br>
| |
| J: Order membrane pump (~$160) - here (TBD – cheaper solution may be available soon)<br>
| |
| | |
| STL for 3D Printing (SLA or FDM) [https://github.com/bcmeter/bcmeter github repository] or [https://bcmeter.org bcmeter.org])<br>
| |
| | |
| <br>Print on any 3d printer or send to any service provider. Use black filament / resin. If possible, use flex filament or mix resin with flex resin.
| |
| 200g Resin / FDM ~ $5-$10<br>
| |
| | |
| | |
| | |
| | |
| [[File:Bcmeter-general-purpose-case.jpg|500px|left]]<br clear=all>
| |
