Difference between revisions of "Main Page"

Revision as of 16:39, 7 July 2021

Welcome to the bcmeter.org Wiki.

We will provide you with all necessery informations to build your own black carbon measurement device.

@@ Line 1: / Line 1: @@
-Basic Requirements:
+Welcome to the bcmeter.org Wiki.
-Solder Iron / Solder / Flux / 3D Printer
-d Print – STL Files are attached
+We will provide you with all necessery informations to build your own black carbon measurement device.
-A: Upper Case
-B: Lower Case
-C: Intake manifold
-D: LED/Sensor holder
-Order (links for convenience, parts are off-the-shelf / available in any regular workshop)
-F:	PCB from pcbway.com, jlcpcb.com  or anywhere else (~$20) – find gerber files for upload attached
-G:	Components from mouser.com or anywhere else  (~$40) – shopping cart to import on mouser attached.
-H:	Order filter papers (~$50) – Pack of 50 sufficient for at least 1000 samples. Type TBD, tested with T60A20 – ask local labs for availability
-I:	Additional material:
-Hot Glue ~$7
-Rubber band (SHORE A) for sealing ~$11
-M3 Screws ~$3
-M3 threads ~$7
-microSD Card (4gb+)
-Pin Header (optional for plug the Hat)