|
|
| Line 1: |
Line 1: |
| Basic Requirements:
| | Welcome to the bcMeter Wiki |
| Solder Iron / Solder / Flux / 3D Printer
| |
|
| |
|
| 3d Print – STL Files are attached
| | Here you'll find all informations needed to build your own black carbon measurement device. |
| A: Upper Case
| |
| B: Lower Case
| |
| C: Intake manifold
| |
| D: LED/Sensor holder
| |
| | |
| Order (links for convenience, parts are off-the-shelf / available in any regular workshop)
| |
| F: PCB from pcbway.com, jlcpcb.com or anywhere else (~$20) – find gerber files for upload attached
| |
| G: Components from mouser.com or anywhere else (~$40) – shopping cart to import on mouser attached.
| |
| H: Order filter papers (~$50) – Pack of 50 sufficient for at least 1000 samples. Type TBD, tested with T60A20 – ask local labs for availability
| |
| I: Additional material:
| |
| Hot Glue ~$7
| |
| Rubber band (SHORE A) for sealing ~$11
| |
| M3 Screws ~$3
| |
| M3 threads ~$7
| |
| microSD Card (4gb+)
| |
| 40 Pin Header (optional for plug the Hat)
| |
Revision as of 18:51, 7 July 2021
Welcome to the bcMeter Wiki
Here you'll find all informations needed to build your own black carbon measurement device.