Difference between revisions of "Troubleshooting"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
== Error "502 bad gateway" when accessing the bcMeter Interface == | |||
if you get a 502 bad gateway error, check PHP-FPM version in /etc/nginx/sites-enabled/default is corresponding to installed php version. | |||
Check version with running "ps aux | grep php-fpm" in terminal. | |||
== The bcMeter does not connect to my WiFi == | |||
== The bcMeter does not connect to my WiFi == | == The bcMeter does not connect to my WiFi == | ||
Revision as of 16:31, 5 January 2022
Error "502 bad gateway" when accessing the bcMeter Interface
if you get a 502 bad gateway error, check PHP-FPM version in /etc/nginx/sites-enabled/default is corresponding to installed php version. Check version with running "ps aux | grep php-fpm" in terminal.
The bcMeter does not connect to my WiFi
The bcMeter does not connect to my WiFi
- Double check this procedure was done correctly and/or repeat it.
- Look at your router interface if there is a new device "raspberrypi" or similar. If you ever had another raspberrypi connected to your wifi, the dns of your router might have assigned another hostname to the raspberry.
The sensor values are very low and do not change
- Check voltages on LED and Sensor
Any other issue
- Let me know, I'm glad to add it here. Mail description and screenshot to jd@bcmeter.org.