Difference between revisions of "BcMeter Parts"
| Line 2: | Line 2: | ||
== Overview of parts and approx. costs == | == Overview of parts and approx. costs == | ||
[[File:Overview.jpg|500px|left]]<br clear=all> | [[File:Overview.jpg|500px|left]]<br clear=all> | ||
<br clear=all> | <br clear=all> | ||
<br> | <br> | ||
A: Upper Case<br> | A: Upper Case (3D Printed)<br> | ||
B: Lower Case<br> | B: Lower Case(3D Printed)<br> | ||
C: Intake manifold<br> | C: Intake manifold(3D Printed)<br> | ||
D: LED/Sensor holder<br> | D: LED/Sensor holder(3D Printed)<br> | ||
E: LED/Sensor holder<br> | E: LED/Sensor holder(3D Printed)<br> | ||
<br>Print on any 3d printer or send to any service provider. Use black filament / resin. If possible, use flex filament or mix resin with flex resin. | |||
200g Resin / FDM ~ $5-$10<br> - 3D printing service is more expansive (~$100) | |||
F: bcMeter 12V or 5V - ~$25(find gerber files for PCB fabrication on [https://bcmeter.org bcmeter.org])<br> | F: bcMeter 12V or 5V - ~$25(find gerber files for PCB fabrication on [https://bcmeter.org bcmeter.org])<br> | ||
| Line 44: | Line 45: | ||
STL for 3D Printing (SLA or FDM) [https://github.com/bcmeter/bcmeter github repository] or [https://bcmeter.org bcmeter.org])<br> | STL for 3D Printing (SLA or FDM) [https://github.com/bcmeter/bcmeter github repository] or [https://bcmeter.org bcmeter.org])<br> | ||
[[File:Bcmeter-general-purpose-case.jpg|500px|left]]<br clear=all> | [[File:Bcmeter-general-purpose-case.jpg|500px|left]]<br clear=all> | ||
Revision as of 22:50, 7 July 2021
Overview of parts and approx. costs
A: Upper Case (3D Printed)
B: Lower Case(3D Printed)
C: Intake manifold(3D Printed)
D: LED/Sensor holder(3D Printed)
E: LED/Sensor holder(3D Printed)
Print on any 3d printer or send to any service provider. Use black filament / resin. If possible, use flex filament or mix resin with flex resin.
200g Resin / FDM ~ $5-$10
- 3D printing service is more expansive (~$100)
F: bcMeter 12V or 5V - ~$25(find gerber files for PCB fabrication on bcmeter.org)
bcMeter general purpose PCB for 12V and large pumps
bcMeter SMD PCB for 5V and smaller pumps
G: Components from mouser.com or anywhere else (~60) – mouser shopping cart or bill of material
H: Filter papers (~$50) – Pack of 50 sufficient for at least 1000 samples. Type TBD, tested with T60A20 – ask local labs for availability
I: Additional material:
- Hot Glue - use to seal air leaks around sensor brackets ~$7
- Rubber band (SHORE A) for sealing intake ~$11
- M3 Screws ~$3
- M3 threads ~$7
(Screws and threads not required for basic operation)
- microSD Card (4gb+)
- 40 Pin Header (optional for plug the Hat)
J: Order membrane pump (~$160) - here (TBD – cheaper solution may be available soon)
3D Printable files
STL for 3D Printing (SLA or FDM) github repository or bcmeter.org)
