Difference between revisions of "Assembly"

From bcmeter.org
Jump to navigation Jump to search
(Wiki update: sync with manual and dev docs (2026-03))
Tag: New redirect
 
(18 intermediate revisions by the same user not shown)
Line 1: Line 1:
'''Requirements:
#REDIRECT [[Device assembly]]
# Screwdriver
#  Solder Iron
#  Solder
#  Flux
#  3D Printer / 3d printing service
#  [[bcMeter Parts]]
 
== Watch Time Lapse! ==
[https://player.vimeo.com/video/568114940 Time lapse of assembly]
 
'''Current version is designed for absolute simplicity so as little as possible SMD components and parts with large footprints are used. Start assembling by soldering the smallest parts first (MMBT3904 + MCP3426).
<br>Then add THT passive parts piece by piece according to description on the PCB and the BOM.'''
 
==Most important:==
 
# Put IRL81A (IR Emitter) and LPT80A (Sensor) in brackets D and E, seal with hot glue and solder wires to the corresponding vias on the PCB. Long leg is anode (positive). [[File:Sensor-emitter-brackets.jpg|thumb|left]]<br clear=all>
# Place adapters D and E in the case A and B. Emitter to top case. Seal with (hot) glue or tape. [[File:Brackets-in-lower-case.jpg|thumb|left]]<br clear=all>
# Put pump in place and do a test run for leakage. [[File:Pump.jpg|thumb|left]]<br clear=all>

Latest revision as of 15:10, 8 March 2026

Redirect to:

Retrieved from "https://bcmeter.org/wiki/index.php?title=Assembly&oldid=298"