Difference between revisions of "Assembly"

Latest revision as of 15:10, 8 March 2026

Redirect to:

@@ Line 1: / Line 1: @@
-Current version is designed for absolute simplicity so as little as possible SMD components and parts with large footprints are used. Start assembling by soldering the smalles parts first (MMBT3904 + MCP3426). Then add THT passive parts piece by piece according to description on the PCB and the BOM.
+#REDIRECT [[Device assembly]]
-# Place IRL81A (IR Emitter) and LPT80A (Sensor) in adapters D and E, seal with hot glue and solder wires to the corresponding vias on the PCB. Long leg is anode (positive). [[File:Sensor-emitter-brackets.jpg|thumb|left]]<br clear=all>
-# Place adapters D and E in the case A and B. Emitter to top case. Seal with (hot) glue or tape. [[File:Brackets-in-lower-case.jpg|thumb|left]]<br clear=all>
-# Put pump in place and do a test run for leakage. [[File:Pump.jpg|thumb|left]]<br clear=all>